JSA library / Outdoor & Grounds

Road Work & Traffic Control JSAJob Safety Analysis template

Working in or next to a roadway with cones, signs and flaggers. Use it as-is or change it to fit your job, then walk the site and add what's different today.

Make this JSA on your phone →

Free · no account · the crew signs on the same phone · prints a professional record

Date

Location

Person in charge

Company

Nearest ER / address

Muster point · Emergency: 911

Job steps, hazards & controls

#	Job step	Hazards	Controls
01	Set up the work zone	Struck by traffic while setting cones and signs	Set up from a protected position; work facing traffic Follow the traffic control plan (MUTCD layouts)
02	Flagging	Flagger struck by a vehicle Drivers not seeing or obeying	Trained flaggers; hi-vis class 2 or 3 Stand on the shoulder with an escape route; stop/slow paddle
03	Work in the zone	Workers stepping out of the zone Equipment backing into workers	Stay inside the cones; never turn your back on traffic Spotters for backing equipment
04	Take down the zone	Struck while picking up cones	Remove in reverse order; protected vehicle behind the crew

Don’t forget to check

Traffic & the PublicHeat StressCold & IceFatigue & Long Shifts

Today’s site-specific hazards

Hazard	Control

Crew sign-in: I reviewed this JSA and I can stop work

Name	Company / role	Signature	Time

How it works on your phone

1 · Pick itTap the button above. This JSA loads with the checks crews most often forget already suggested.

2 · Walk the siteAdd where you are, who's in charge and the nearest ER. The first person on site adds today's hazards.

3 · Crew signsPass the phone. Each person reads every step and signs. Print or save the PDF.

This JSA is a starting point built from common field practice. Your job, your site and your company's procedures come first: change anything that doesn't fit, and follow your permits and regulations.